EN
- 中文
- ITALIANO
- ENGLISH
- 日本語

News

Home page /

2020

CNHT micro pump_ Main Methods for Prolonging Service Life of Vacuum Pump of Cooking Machine

Author:

No matter what product is used for a long time, it will have some minor faults. Each product has its own service life, and various damages will occur once the service life is reached. CNHT micro pump_ Of course, the same is true of the vacuum pump of the cooking machine. Extending the service life of the vacuum pump of the cooking machine is a top priority. How can we extend the service life of the vacuum pump of the cooking machine? You can see the following methods.

Extended CNHT micropump_ Methods for service life of vacuum pump of the blender:

1. Reduce various corrosion effects

The metal surface of the vacuum pump of the cooking machine is damaged due to chemical or electrochemical action with the surrounding medium. Such corrosion will not only affect the normal operation of the mechanical surface equipment, but also affect the internal parts of the vacuum pump of the cooking machine.

2. Reduce the impact of impurities in the working environment

For the vacuum pump of the blender working in the harsh environment and messy conditions, first, use high-quality and matched parts and components, lubricating oil and grease to block the source of harmful impurities; second, do a good job of mechanical protection at the work site to ensure that the corresponding organizations can work normally to prevent various impurities from entering the mechanical interior of the vacuum pump; for the defective machinery, try to repair in the standard repair site; when repairing at the site, Protective measures shall also be taken to prevent the parts replaced during on-site repair from being polluted by dust and other impurities before entering the machinery.

3. Ensure normal working load

The size and nature of the working load have a major impact on the loss process of the vacuum pump of the blender. Generally speaking, the wear of the parts increases proportionally with the increase of the load. When the load accepted by the parts is higher than the uniform planning load, the wear will be aggravated. When other conditions are the same, the wear under the stable load is smaller than under the dynamic load, with fewer defects.

4. Reduce the impact of the surrounding environment

During the operation of the vacuum pump of the cooking machine, first, it is necessary to prevent overloading under low temperature, so that the machine can move or work after reaching the specified temperature. Do not ignore its main role because there is no doubt at the moment, strictly control the temperature, and do not allow the machine to work under high temperature. During the mechanical work process, it is necessary to often check the values on various thermometers, and stop the machine for inspection immediately if there is any doubt, Timely check and repair when problems are found.

The above is the way to extend the service life of the vacuum pump of the blender. In addition, we can also make a judgment before purchasing, starting from the raw materials used and processing, hoping to help you to choose a better product.

CNHT micro pump_ Four methods to prolong the service life of micro pump

CNHT micro pump_ Reference for selection parameters of micro air pump

CNHT micro pump_ Four methods to prolong the service life of micro pump

CNHT micro pump_ Reference for selection parameters of micro air pump